Camac 1000Kg Rack and Pinion Hoists
- Maximum safety and robustness.
- Galvanized cage and columns.
- Easy installation.
- Electronic floor selection system.
- Triangular mast compatible with: ECP-1000/150, EPM-1000/150 and CAMAC-2000.
Ease & Efficiency
Designed for ease and efficiency, this hoist will ensure thath your crew will spend more time in finishing the job sooner. This hoist is robust and is constructed to carry heavy materials, with a maximum capacity of 1000kg. It also has loading and unloading ramps on either side of the hoist, thus making it easy to get the materials in and out.
An extensive range of platforms, load capacities, lifting heights, and hoisting speeds, along with the exceptional accessories, make these rack and pinion lifts flexible to use, to the point where they can be completely customised to suit your on-site conditions.
Whether the work being done is for new build projects, façade works, or renovation or remodelling, rack and pinion lifts from Hoist & Plant, such as the CAMAC 1000Kg, can meet practically every development site requirement.
POWER SUPPLY 415V 3PHASE 5 PIN 32AMP SOCKET REQUIRED START UP 60 AMPS RUN 22AMPS
TRIANGULAR COLUMN COMPATIBLE CON ECP-1000/150, EPM-1000/150 AND CAMAC-2000
|Technical Features||MB 500 / 120-S|
|Max Anchored Height||m. 150|
|Distance between Anchorages||m. 6|
|Platform Width||mm. 1450|
|Platform Length||mm. 1750|
|Voltage||380 – 50 V-Hz|
|Climbing Speed||m./min 20|
|Motor Power||KW. 6|